Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor Electrical Connector and Locking Tab

Courtesy of GENERAL MOTORS CORP.

Remove the fuel pump module assembly. Refer to Fuel Tank Fuel Pump Module Replacement .
Disconnect the fuel level sensor electrical connector (1).
Disengage the locking tab (2) on the fuel level sensor by pushing inward.

Fig 2: Identifying the Fuel Level Sensor and Alignment Feature

Courtesy of GENERAL MOTORS CORP.

Remove the fuel level sensor (1) from the alignment feature (2).