FixVault
Home › Chevrolet › 2007 › Impala SS › Repair and Diagnosis › Suspension › Wheel Alignment System › Repair Instructions › Rear Camber Adjustment › Removal Procedure

Removal Procedure

  1. Raise the vehicle and provide suitable support. Refer to Lifting and Jacking the Vehicle .
    Fig 1: Identifying Rear Camber Adjustment
    GM156938Courtesy of GENERAL MOTORS CORP.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
  4. Place the strut in a vise and file the upper strut-to-knuckle hole lateral - oblong. Compare the appearance of the holes before filing (2) with after filing (3).
About FixVault