FixVault
Home › Chevrolet › 2007 › Malibu SS › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Liftgate Window Replacement › Installation Procedure

Installation Procedure

  1. Install the liftgate window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (Liftgate)  or Urethane Adhesive Installation of Stationary Windows (Rear Window)  or Urethane Adhesive Installation of Stationary Windows (Windshield) .
  2. Connect the liftgate window defogger electrical connectors to the bus bar.
  3. Install the high-mounted stop lamp. Refer to High Mounted Stop Lamp Replacement (Extended Sedan) or High Mounted Stop Lamp Replacement (Sedan) .
  4. Install the liftgate trim. Refer to Liftgate Trim Panel Replacement (Lower) or Liftgate Trim Panel Replacement (Right or Left) or Liftgate Trim Panel Replacement (Upper) .
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  6. Close the liftgate.
About FixVault