FixVault
Home › Chevrolet › 2007 › Optra LS, Automatic › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Wiring Systems And Power Management - Specifications And Ignition Switch Replacement › Repair Instructions › Ignition and Start Switch Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: View Of Ignition Switch Wiring And Retaining Screw
    GM1308230Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition switch with the ignition switch retaining screw.

    Tighten:  Tighten the ignition switch retaining screw to 2.5 N.m (22 lb in)  .

  2. Connect the wiring to the ignition switch.
  3. Install the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .
About FixVault