FixVault
Home › Chevrolet › 2007 › Optra LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.8L (LDA) › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of CKP Sensor Connector
    GM1701072Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the crankshaft position (CKP) sensor connector.
    3. Fig 2: View Of CKP Sensor And Retaining Bolt
    GM1701073Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor retaining bolt.
  4. Gently rotate and remove the CKP sensor from the engine block.
About FixVault