FixVault

Installation Procedure

    Fig 1: View Of Sunroof Housing Bolts
    GM1309165Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the housing to the roof of the vehicle with the bolts.

    Tighten:  Tighten the sunroof housing bolts to 10 N.m (89 lb in)  .

  2. Fig 2: View Of Sunroof Motor And Screws
    GM1309162Courtesy of GENERAL MOTORS CORP.
  3. Install the motor control module.
  4. Install the motor with the screws.

    Tighten:  Tighten the sunroof motor screws to 3 N.m (27 lb in)  .

  5. Connect the electrical connectors.
  6. Fig 3: View Of Drain Hose
    GM1308643Courtesy of GENERAL MOTORS CORP.
  7. Install the drain hoses.
  8. Install the headliner. Refer to Headlining Trim Panel Replacement .
  9. Connect the negative battery cable.