FixVault
Home › Chevrolet › 2007 › Silverado Classic 1500 HD, RWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Brake Pedal Position Sensor Calibration › Calibration Procedure

Calibration Procedure

  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
    3. IMPORTANT: Make sure the brake pedal is not pressed before sending the BPP sensor calibration command.
  3. Navigate to the Special Functions screen on the scan tool and select BPP Sensor Calibration in order to perform the brake pedal position sensor calibration.
About FixVault