FixVault
Home › Chevrolet › 2007 › Uplander Base, 3.9 1 › Repair and Diagnosis › Maintenance › Procedures › Maintenance And Lubrication › Maintenance › GM Oil Life System Resetting › Resetting Procedure

Resetting Procedure

Follow this procedure to reset the GM Oil Life System™:

  1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the driver information center (DIC).
  2. Once OIL is displayed, push and hold the trip/reset button for 5 seconds. The number will disappear and be replace by 100 indicating 100 percent oil life remaining.
  3. Turn the key to OFF.
  4. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure.
About FixVault