FixVault

Installation Procedure

    Fig 1: View of Front Speaker and Screws
    GM1248467Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. NOTE: Refer to Fastener Notice .
  3. Install the front speaker with the screws.

    Tighten:  Tighten the front speaker screws to 3.5 N.m (31 lb in).

  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Notchback) or Front Side Door Trim Panel Replacement (Hatchback) .
  5. Connect the negative battery cable.