| Clutch Actuator Cylinder Mounting Bolts |
12 N.m |
106 lb in |
| Clutch Pedal Bracket Mounting Nuts |
27 N.m |
20 lb ft |
| Clutch Pedal Nut |
50 N.m |
37 lb ft |
| Clutch Pressure Plate Bolts1 |
70 N.m |
52 lb ft |
| Cruise Control Release Switch Bracket Retaining Bolts |
12 N.m |
106 lb in |
| Driver Foot Rest Bracket Retaining Bolt |
8 N.m |
71 lb in |
| Driver Foot Rest Bracket Retaining Nut |
10 N.m |
89 lb in |
| Engine Flywheel Inspection Cover Retaining Bolts |
25 N.m |
18 lb ft |
| Negative Battery Cable Bolt |
15 N.m |
11 lb ft |
| 1
Clutch pressure plate bolts must be tightened in sequence and in even increments over three passes, then tightened to final specification on the fourth pass. |