FixVault
Home › Chevrolet › 2008 › HHR LS, Standard › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement › Removal Procedure

Removal Procedure

    Fig 1: Yaw Rate Sensor Nuts
    GM2017685Courtesy of GENERAL MOTORS CORP.
  1. Turn OFF the ignition.
  2. Remove the right front seat. Refer to Front Seat Replacement - Bucket .
  3. Remove the right side body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side .
  4. Carefully lift the floor carpet to access the yaw rate sensor.
  5. Disconnect the yaw rate sensor electrical connector.
  6. Remove the yaw rate sensor nuts (1).
    7. Fig 2: Yaw Rate Sensor
    GM2017689Courtesy of GENERAL MOTORS CORP.
  7. Remove the yaw rate sensor (1).
About FixVault