FixVault
Home › Chevrolet › 2008 › Impala SS › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System & Remote Functions › Diagnostic Information and Procedures › DTC B1008 › Circuit/System Verification

Circuit/System Verification

  1. Perform the SPS programming procedure to download calibrations to the RCDLR. Refer to Service Programming System (SPS) .
  2. Operate the vehicle within the Condition for Running the DTC and verify the DTC does not reset.
    • If the DTC resets, replace the RCDLR.
About FixVault