FixVault
Home › Chevrolet › 2008 › Optra LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L (Diesel) › Repair Instructions › Exhaust Temperature Sensor Replacement - Position 2 › Removal Procedure

Removal Procedure

    Fig 1: Locating EGT Sensor 2
    GM1820627Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the exhaust gas temperature (EGT) sensor 2 connector.
  3. Remove the EGT sensor 2 from the front exhaust pipe.
About FixVault