FixVault
Home › Chevrolet › 2008 › Optra LS, Standard › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: View Of Rear Wheel Speed Sensor Electrical Connector
    GM1255824Courtesy of GENERAL MOTORS CORP.
  1. Install the rear hub unit to the knuckle assembly. Refer to Rear Wheel Bearing and Hub Replacement .
  2. Connect the rear wheel speed sensor electrical connector.
  3. Connect the negative battery cable.
About FixVault