FixVault
Home › Chevrolet › 2008 › Optra5 LS, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L (Diesel) › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition switch to the off position.
  2. Disconnect the electronic throttle control (ETC) connector from the accelerator pedal.
    3. Fig 1: View Of Accelerator Pedal And Retaining Nuts
    GM1962902Courtesy of GENERAL MOTORS CORP.
  3. Remove the 3 accelerator pedal retaining nuts.
  4. Remove the accelerator pedal.
About FixVault