FixVault
Home › Chevrolet › 2008 › Optra5 LT, Automatic › Repair and Diagnosis › Steering › Steering Column › Steering Wheel And Column › Repair Instructions › Turn Signal Multifunction Switch Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
    2. Fig 1: Identifying Steering Column Cover Panel Screws
    GM1308107Courtesy of GENERAL MOTORS CORP.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.
    4. Fig 2: Identifying Turn Signal Switch Release Tabs
    GM1308108Courtesy of GENERAL MOTORS CORP.
  4. Remove the turn signal switch by pushing the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connections from the turn signal switch.
About FixVault