FixVault
Home › Chevrolet › 2009 › Chevy Express G3500, Van Passenger › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 4.8L, 5.3L Or 6.0L - Introduction › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Installation Procedure

Installation Procedure

IMPORTANT: Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.
  1. Install the MAP sensor to the upper intake manifold.
  2. Fig 1: Intake Manifold MAP Sensor
    GM260159Courtesy of GENERAL MOTORS CORP.

    Connect the MAP sensor electrical connector.
  3. Install the engine cover. Refer to Engine Cover Replacement .
About FixVault