FixVault
Home › Chevrolet › 2009 › HHR LS, Standard › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Battery Current Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Negative Battery Cable
    GM1631636Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Remove the tape securing the battery current sensor to the negative battery cable.
    3. Fig 2: Identifying Battery Current Sensor
    GM1631638Courtesy of GENERAL MOTORS CORP.
  3. Remove the battery current sensor from the negative battery cable.
About FixVault