FixVault
Home › Chevrolet › 2009 › HHR LS, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.2L Or 2.4L - Introduction › Repair Instructions › Knock Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Harness
    GM1622787Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the knock sensor (KS) electrical connector (6).
    3. Fig 2: Identifying Knock Sensor
    GM1578476Courtesy of GENERAL MOTORS CORP.
  3. Remove the KS bolt.
  4. Remove the KS.
About FixVault