Steering Angle Sensor Replacement

Fig 1: View Of Intermediate Steering Shaft & Steering Angle Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Intermediate Steering Shaft Bolt CAUTION: Refer to Fastener Caution . Tip: Secure the steering wheel to keep it from moving once the intermediate steering shaft is disconnected from the steering column. Tighten: 34 N.m (25 lb ft)
2	Intermediate Steering Shaft Procedure: Mark the alignment of the intermediate steering shaft to the steering column before disconnecting it.
3	Steering Angle Sensor Procedure Disconnect any electrical connectors as needed. Use the alignment bracket on the steering column when reinstalling the steering angle sensor.

Callout

Component Name

Intermediate Steering Shaft Bolt

CAUTION: Refer to Fastener Caution .

Tip: Secure the steering wheel to keep it from moving once the intermediate steering shaft is disconnected from the steering column.

Tighten: 34 N.m (25 lb ft)

Intermediate Steering Shaft
Procedure:
Mark the alignment of the intermediate steering shaft to the steering column before disconnecting it.

Steering Angle Sensor

Procedure

Disconnect any electrical connectors as needed.
Use the alignment bracket on the steering column when reinstalling the steering angle sensor.