FixVault
Home › Chevrolet › 2009 › HHR LS, Standard › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Turn Signal Multifunction Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Multifunction Turn Signal Switch
    GM1551345Courtesy of GENERAL MOTORS CORP.
  1. Install the turn signal multifunction switch (1). Ensure the locking tabs are snapped into place.
  2. Connect the turn signal multifunction switch electrical connectors.
  3. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  4. Install the instrument panel cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
About FixVault