FixVault
Home › Chevrolet › 2009 › Impala SS › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Converter Hanger Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: Catalytic Converter Hangers
    GM1553064Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Using a suitable jack, support the exhaust system, if necessary.
  3. Remove and discard the catalytic converter pipe hangers (1), if necessary.
About FixVault