FixVault
Home › Chevrolet › 2009 › Impala SS › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 5.3L - Introduction › Repair Instructions › Crankshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of CKP Sensor & Bolt
    GM55322Courtesy of GENERAL MOTORS CORP.
  1. Install the CKP sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the CKP sensor bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Crankshaft Position (CKP) Sensor Electrical Connector
    GM1554552Courtesy of GENERAL MOTORS CORP.
  3. Connect the CKP sensor electrical connector (1).
  4. Install the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (LS4) or Exhaust Manifold Replacement - Right Side (LZE/LZ4/LZ8) .
  5. Perform the CKP system variation learn procedure. Refer to Crankshaft Position System Variation Learn .
About FixVault