FixVault
Home › Chevrolet › 2009 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 1624 (Antilock Brake System) › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of BPMV & Bracket
    GM1961262Courtesy of GENERAL MOTORS COMPANY
  1. Install the bracket (1) to the BPMV.
    2. Fig 2: Identifying BPMV Bolt
    GM1961238Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the BPMV bolt (1) and tighten to 10 N.m (89 lb in).
  3. Install the BPMV. Refer to Brake Pressure Modulator Valve Replacement .
About FixVault