Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Route the antenna base and cable assembly as noted in the removal.
- Connect the antenna cable to the antenna extension lead.
- Install the cowl side trim panel. Refer to Trim Panel Replacement - Cowl Side in Interior Trim.
- Install the instrument panel insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
- Tighten the locking nut in order to secure the antenna base to the fender.
Tighten: Tighten the nut to 5 N.m (44 lb in).
- Install the antenna mast.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.