Inflatable Restraint Steering Wheel Module Coil Replacement

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inflatable Restraint Steering Wheel Module Coil

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 5 .
1	Module, Steering Wheel Inflatable Restraint Refer to Inflatable Restraint Steering Wheel Module Replacement .
2	Nut, Steering Wheel Tighten: 40 N.m (30 lb ft)
3	Wheel, Steering Refer to Steering Wheel Replacement .
4	Cover, Steering Column Lower Shroud
5	Bolt, Steering Column Upper Shroud Tighten: 3.5 N.m (31 lb in)
6	Screw, Steering Column Lower Shroud Tighten: 1.5 N.m (13 lb in)
7	Shroud, Steering Column Lower Refer to Steering Column Trim Covers Replacement .
8	Screw, Steering Column Upper Shroud Tighten: 3.5 N.m (31 lb in)
9	Shroud, Steering Column Upper Refer to Steering Column Trim Covers Replacement .
10	Screw, Inflatable Restraint Steering Wheel Module Coil Tighten: 2.5 N.m (22 lb in)
11	Coil, Inflatable Restraint Steering Wheel Module Tip: Center the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Centering .