FixVault
Home › Chevrolet › 2009 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 199 (Stationary Window System) › Repair Instructions › Ambient Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Ambient Air Temperature Sensor
    GM1482430Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (3) to the ambient temperature sensor (1).
  2. Position the sensor to the radiator support and install a NEW retainer (2).
  3. Install the lower front bumper fascia. Refer to Fascia Replacement - Front Bumper - Lower (Buick ) , Fascia Replacement - Front Bumper - Lower (Chevrolet) or Fascia Replacement - Front Bumper - Lower (Pontiac ) in Bumpers.
  4. Close the hood.
About FixVault