FixVault
Home › Chevrolet › 2009 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 249 (Lighting Systems) › Repair Instructions › Emergency Vehicle Interior Switch Replacement (Impala) › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headlamp Switch Assembly
    GM803664Courtesy of GENERAL MOTORS CORP.
  1. Remove the trim plate bezel from the instrument panel (I/P) cluster. Refer to Trim Plate Replacement - Instrument Panel (I/P) (Impala) or Trim Plate Replacement - Instrument Panel (I/P) (Monte Carlo) .
  2. Remove the headlamp switch assembly screws.
  3. Pull the headlamp switch assembly from the I/P.
    4. Fig 2: Disconnecting Electrical Connector From Emergency Vehicle Interior Switch
    GM803666Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the emergency vehicle interior switch.
    5. Fig 3: Removing Emergency Vehicle Interior Switch
    GM803669Courtesy of GENERAL MOTORS CORP.
  5. Remove the emergency vehicle interior switch from the back of the headlamp switch assembly.
About FixVault