Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Coil Spring

Courtesy of GENERAL MOTORS CORP.

Install the rear coil springs.
Raise the rear axle.

Fig 2: View Of Shock Absorber Lower Mounting Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the shock absorber lower mounting bolts.
Tighten: Tighten the shock absorber lower mounting bolts to 85 N.m (63 lb ft).
Remove the rear axle support.
Lower the vehicle