FixVault
Home › Chevrolet › 2009 › Traverse LS, AWD › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Rear Object Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical from the rear object sensor.
  3. Lift the locking tabs on the housing and remove the rear object sensor.
About FixVault