FixVault
Home › Chevrolet › 2009 › Traverse LS, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.6L - Introduction › Repair Instructions › Fuel Injection Fuel Rail Crossover Tube Replacement (LLT) › Removal Procedure

Removal Procedure

  1. Remove the fuel injection sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Remove the high pressure pump shield. Refer to Fuel Pipe Shield Replacement .
  3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH-48027)  or Fuel Pressure Relief (Without CH-48027) .
  4. Remove the intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT .
    5. Fig 1: Identifying Fuel Rail Crossover Pipe & Right Fuel Rail
    GM1977748Courtesy of GENERAL MOTORS CORP.
  5. Loosen the fuel rail crossover pipe (1) fitting to the right fuel rail (2).
  6. Loosen the fuel rail crossover pipe (1) fitting to the right fuel rail (3).
  7. Remove the fuel rail crossover pipe (1) from the vehicle. Discard the pipe.
About FixVault