Installation Procedure

Fig 1: View Of Ignition Coils

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the ignition coil bolt(s).
Tighten: Tighten the bolt(s) to 10 N.m (89 lb in).

Fig 2: View Of Ignition Coil Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s) (4).
Install the fuel injection sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT