Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Rearview Mirror

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Inside Rearview Mirror Screw CAUTION: Refer to Fastener Caution . Procedure Remove the inside rearview mirror cover, if equipped. Tighten 2 N.m (18 lb in)
2	Inside Rearview Mirror Procedure Disconnect the electrical connector, if equipped. Adjust the mirror to the full upward position. Slide the mirror upward off of the rearview mirror button. Refer to Control Module References for programming and setup information.

Callout

Component Name

Inside Rearview Mirror Screw

CAUTION:

Refer to Fastener Caution .

Procedure
Remove the inside rearview mirror cover, if equipped.
Tighten
2 N.m (18 lb in)

Inside Rearview Mirror

Procedure

Disconnect the electrical connector, if equipped.
Adjust the mirror to the full upward position.
Slide the mirror upward off of the rearview mirror button.
Refer to Control Module References for programming and setup information.