Inflatable Restraint Sensing and Diagnostic Module Replacement

Fig 1: Identifying Inflatable Restraint Sensing & Diagnostic Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the front floor console. Refer to Front Floor Console Replacement (Traverse) or Front Floor Console Replacement (Acadia) or Front Floor Console Replacement (Enclave) or Front Floor Console Replacement (OUTLOOK) . Remove HVAC floor duct. Position carpet in order to access sensor. Disconnect the electrical connector.
1	Inflatable Restraint Sensor and Diagnostic Module Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (88 lb ft)
2	Inflatable Restraint Sensor and Diagnostic Module Assembly Procedure When installing, ensure the arrow on the module is pointed towards the front of the vehicle. If installing a replacement module, program the module. Refer to Control Module References .

Callout

Component Name

WARNING: Refer to SIR Warning .

Preliminary Procedures

Disable the SIR system. Refer to SIR Disabling and Enabling .
Remove the front floor console. Refer to Front Floor Console Replacement (Traverse) or Front Floor Console Replacement (Acadia) or Front Floor Console Replacement (Enclave) or Front Floor Console Replacement (OUTLOOK) .
Remove HVAC floor duct.
Position carpet in order to access sensor.
Disconnect the electrical connector.

Inflatable Restraint Sensor and Diagnostic Module Nut (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (88 lb ft)

Inflatable Restraint Sensor and Diagnostic Module Assembly

Procedure

When installing, ensure the arrow on the module is pointed towards the front of the vehicle.
If installing a replacement module, program the module. Refer to Control Module References .