FixVault
Home › Chevrolet › 2009 › Traverse LS, AWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Lower Control Arm Ball Joint Replacement › Removal Procedure

Removal Procedure

  1. Remove the lower control arm assembly. Refer to Lower Control Arm Replacement .
  2. Install the lower control arm in a vise.
    3. Fig 1: Drilling Off Head Of Rivet
    GM1853593Courtesy of GENERAL MOTORS CORP.
    NOTE: Use a center punch to aid in starting the drill if drilling the rivet.
  3. Drill or grind off the head of the rivet.
    4. Fig 2: View Of Rivets Removal With Punch & Hammer
    GM1853591Courtesy of GENERAL MOTORS CORP.
  4. Use a punch and a hammer to loosen the rivets from the lower control arm.
    5. Fig 3: Identifying Rivets
    GM1853594Courtesy of GENERAL MOTORS CORP.
  5. Remove the rivets from the lower control arm.
    6. Fig 4: View Of Ball Joint At Lower Control Arm
    GM1853595Courtesy of GENERAL MOTORS CORP.
  6. Remove the ball joint from the lower control arm.
About FixVault