FixVault
Home › Chevrolet › 2009 › Traverse LS, AWD › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Lower Control Arm Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the outer tie rod end from the steering knuckle. Refer to Steering Linkage Outer Tie Rod Replacement .
  4. Turn the knuckle to the left.
  5. Using the proper size allen wrench and wrench, loosen the lower ball joint nut.
    6. Fig 1: Identifying J 42188 Ball Joint Separator
    GM2001931Courtesy of GENERAL MOTORS CORP.
  6. Using the J 42188:  Ball Joint Separator (1), remove the lower ball joint from the knuckle.
    7. Fig 2: Identifying Lower Ball Joint Retaining Nut
    GM1853193Courtesy of GENERAL MOTORS CORP.
  7. Remove the lower ball joint nut.
    8. Fig 3: Identifying Front Lower Control Arm Nut
    GM1853070Courtesy of GENERAL MOTORS CORP.
  8. Remove the front lower control arm front nut (4) from the stud (3).
  9. Remove the lower control arm rear nut (2) and bolt (1).
    10. Fig 4: Identifying Lower Control Arm
    GM1853091Courtesy of GENERAL MOTORS CORP.
  10. Remove the front lower control arm from the vehicle.
About FixVault