FixVault
Home › Chevrolet › 2009 › Uplander Base, 3.9 1 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Data Communications › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Data Link Connector
    GM386625Courtesy of GENERAL MOTORS CORP.
  1. Place the DLC into position.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bolts/screws to the DLC and tighten to 2 N.m (18 lb in)  .
About FixVault