FixVault
Home › Chevrolet › 2009 › Uplander Base, 3.9 1 › Repair and Diagnosis › Electrical › Starter › Engine Electrical › Repair Instructions › Battery Current Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Battery Current Sensor Electrical Connector
    GM1533512Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Remove the tape (3) securing the battery current sensor (1) to the negative battery cable (4).
    3. Fig 2: Identifying Battery Current Sensor
    GM1533515Courtesy of GENERAL MOTORS CORP.
  3. Remove the battery current sensor (2) from the negative battery cable (1).
About FixVault