FixVault
Home › Chevrolet › 2009 › Uplander Base, 3.9 M › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Front Side Door Window Channel Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Door Window Run Channel
    GM813007Courtesy of GENERAL MOTORS CORP.
  1. Position the front door window run channel to the front door.
    2. Fig 2: Locating Front Door Window Run Channel Screws
    GM319748Courtesy of GENERAL MOTORS CORP.
  2. Position the front door window run channel to the front door window weatherstrip, pressing in until fully seated.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the front door window run channel screws and tighten to 10 N.m (89 lb in)  .
  4. Install the front door speaker. Refer to Radio Front Speaker Replacement .
  5. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
About FixVault