FixVault
Home › Chevrolet › 2009 › Uplander Base, 3.9 M › Repair and Diagnosis › Suspension › Electronic Suspension › Automatic Level Control › Repair Instructions › Automatic Level Control Air Compressor Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the ALC shield (2) onto the vehicle.
  2. Install the ALC relay onto the vehicle. Refer to Automatic Level Control Relay Replacement .
    3. Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the ALC shield bolt (1) and retainers to the vehicle and tighten to 6 N.m(53 lb in)  .
  4. Install the ALC compressor assembly onto the vehicle. Refer to Air Compressor Replacement .
  5. Lower the vehicle.
About FixVault