FixVault
Home › Chevrolet › 2009 › Uplander Base, 3.9 M › Repair and Diagnosis › Suspension › Electronic Suspension › Automatic Level Control › Repair Instructions › Automatic Level Control Relay Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Automatic Level Control Relay Electrical Connector
    GM878218Courtesy of GENERAL MOTORS CORP.
  1. Connect electrical connector (1) into the automatic level control relay (2).
    2. Fig 2: Locating Mounting Screw For Automatic Level Control Relay
    GM878217Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install mounting screw (1) into the automatic level control relay and tighten to 6 N.m (53 lb in)  .
  3. Lower the vehicle.
About FixVault