FixVault
Home › Chevrolet › 2010 › Camaro LS, Automatic › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › DTC C0245 › Circuit/System Testing

Circuit/System Testing

  1. Inspect for one tire that has improper air pressure or improper size.
    • If not all the same pressure, adjust all tire pressures to specification. If not all the same size, replace the incorrect tire.
  2. Inspect the wheel speed sensors for contamination, physical damage and correct installation.
    • If contamination, physical damage or incorrect installation is diagnosed, repair or replace the wheel speed sensor and verify the DTC does not reset.
  3. If the DTC resets, replace the K17 Electronic Brake Control Module (EBCM).
About FixVault