FixVault
Home › Chevrolet › 2010 › Cobalt LS, 2D Coupe, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.2L - Repair Instructions › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of CKP Sensor Wiring Harness Electrical Connector And CKP Sensor
    GM1656996Courtesy of GENERAL MOTORS CORP.
  1. Remove the starter. Refer to Starter Replacement .
  2. Disconnect the crankshaft position (CKP) sensor wiring harness electrical connector from the CKP sensor.
    3. Fig 2: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault