FixVault
Home › Chevrolet › 2010 › Cutaway 6.6 L › Repair and Diagnosis › Brakes › Antilock Brake System With Traction Control System & Stability Control System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    Fig 1: Identifying Rear Wheel Speed Sensor
    GM1372892Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Brake Dust Warning .
  2. For the left rear sensor, remove the leaf spring anchor plate. Refer to Leaf Spring Replacement (1500/3500) or Leaf Spring Replacement (4500 Series) .
  3. Disconnect the electrical connector.
  4. Remove the wheel speed sensor retaining bolt.
  5. Remove the wheel speed sensor and spacer block.
About FixVault