FixVault
Home › Chevrolet › 2010 › Cutaway 6.6 L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Wiring Harness Electrical Connector
    GM1862030Courtesy of GENERAL MOTORS COMPANY
  1. Remove the charge air cooler outlet pipe. Refer to Charge Air Cooler Outlet Pipe Replacement .
  2. Disconnect the engine wiring harness electrical connector (2) from the throttle body.
    3. Fig 2: Identifying Intake Air Valve Bolts
    GM1862033Courtesy of GENERAL MOTORS COMPANY
  3. Remove the throttle body bolts and throttle body.
About FixVault