FixVault
Home › Chevrolet › 2010 › Equinox LS, AWD › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Object Detection System › Diagnostic Information and Procedures › DTC B1395 › Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the P24 Park Assist Display.
  2. Ignition ON, test for 9-13V between the B+ circuit terminal A and ground.
    • If less than the specified range, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K41 Parking Assist Control Module.
    • If greater than the specified range, test the B+ circuit for a short to voltage. If the circuit tests normal, replace the K41 Parking Assist Control Module.
  3. If all circuits test normal, replace the P24 Park Assist Display.
About FixVault