FixVault
Home › Chevrolet › 2010 › Equinox LS, AWD › Repair and Diagnosis › Brakes › Antilock Brake System With Traction Control System & Stability Control System › Diagnostic Information and Procedures › DTC C0161 › Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, inspect the B22 Brake Pedal Position Sensor for correct installation.
    • If loose or incorrect installation is diagnosed, correct the installation of the component.
  2. Ignition ON, perform the Brake Pedal Position Sensor Calibration and verify the DTC does not reset.
    • If the DTC resets, replace the K17 Electronic Brake Control Module (EBCM).
About FixVault