FixVault
Home › Chevrolet › 2010 › HHR LS, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.2L Or 2.4L - Repair Instructions › Repair Instructions › Crankshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the CKP sensor O-ring seal with clean engine oil.
  2. Install the CKP sensor.
    CAUTION: Refer to Fastener Caution .
  3. Install the CKP sensor bolt.

    Tighten:  Tighten the sensor bolt to 10 N.m (89 lb in).

    4. Fig 2: Engine Harness
    GM1622787Courtesy of GENERAL MOTORS CORP.
  4. Connect the CKP sensor electrical connector (4).
  5. Install the starter. Refer to Starter Replacement .
About FixVault