FixVault
Home › Chevrolet › 2010 › HHR SS, Automatic › Repair and Diagnosis › Brakes › Antilock Brake System With Traction Control System & Stability Control System › Diagnostic Information and Procedures › DTC C0460 › Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC C0460 is not set in the PSCM. If DTC is set refer to DTC C0460 .
  2. With the scan tool perform the steering position sensor calibration.
  3. Clear DTC and operate the vehicle within the conditions for running the DTC. Verify the DTC does not reset.
    • If the DTC resets, refer to circuit testing.
About FixVault