FixVault
Home › Chevrolet › 2010 › HHR SS, Standard › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls And Fuel - 2.0L - Repair Instructions › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: APP Sensor
    GM1633085Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP sensor nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    3. Fig 2: APP Sensor Electrical Connector
    GM1633081Courtesy of GENERAL MOTORS CORP.
  3. Connect the APP sensor electrical connector (1).
  4. Install the insulator panel. Instrument Panel Insulator Replacement .
About FixVault